Customization: | Available |
---|---|
Certification: | ISO, RoHS, CE |
Installation: | Surface Mount |
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Specification:
Wireless Signal Range |
350 ft., open air, with 2GIG or Honeywell Wireless Alarm Control Panel |
Code Outputs |
Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery |
Transmitter Frequency |
345.000 MHz (crystal controlled) or other frequency |
Transmitter Frequency Tolerance |
± 15 kHz |
Transmitter Bandwidth |
24 kHz |
Modulation Type |
Amplitude Shift Keying-On/Off Keying (ASK-OOK) |
Unique ID Codes |
Over one (1) million different code combinations |
Supervisory Interval |
70 minutes |
Peak Field Strength |
Typical 16,000 uV/m at 3m |
External Input Sampling Current |
20 uA |
External Input |
Accepts N/C dry contact devices |
Reed Switch Magnetic Sensitivity |
10 to 15 amp turns |
Reed Sensitivity |
0.625 in. (1.59 cm) minimum gap, 1 in. (25 cm) typical |
Magnet Type |
Rare earth |
Magnet Dimensions (LxWxH) |
1.5 x 0.37 x 0.26 in. (3.8 x 0.94 x 0.65 cm) |
Sensor Dimensions (LxWxH) |
2.59 x 1.03 x 0.52 in. (6.59 x 2.63 x 1.32 cm) |
Housing Material |
ABS plastic |
Color |
White, Tan or Brown available |
Operating Temperature |
32° to 120°F (0° to 49°C) |
Relative Humidity |
5-95% Non-Condensing |
Battery (included) |
Two (2) CR2032, or equivalent Lithium batteries |
Battery life |
2 years (on normal condition) |
Regulatory Listing |
FCC Part 15 |
Warranty |
Two (2) years(limited) |
Included Accessories |
Two (2) Phillip's flat-head screws, one (1) two-pin connector with a 12" flying 2-wire lead, adhesive strip |
Weight |
1.16 oz. (33 g) (including battery & magnet) |
Compatibility |
Honeywell, 2GIG, GE, and DSC |
Wireless Door Sensor Wc10-345 Honeywell, 2gig Compatible
Models available:
WC10-H: compatible with Honeywell and 2GIG wireless panel (345MHz)
WC10-2: compatible with 2GIG wireless panel (345MHz)
WC10-G: compatible with GE Intelogix wireless panel (319.5MHz)
WC10-D: compatible with DSC wireless panel (433.9MHz)
Note:other protocol and frequency available upon special request.
Related ProductsCompany Information